SALT – SEALED AND LUBRICATED TRACK: Has special seals and thrust rings to seal the link bore to the track bushing creating a protected space around the track pin which is filled with oil.
Grousers or Track Shoes are intended to increase the traction of tracks, especially in loose material such as soil or rocks. This is done by increasing contact with the ground with protrusions
Add this to your quote/cart if you want us to assemble new grousers onto your new track chain
The carrier or top rollers are mounted above the track frame. They support the track as it passes over the undercarriage frame assembly.
The track rollers support the weight of the track type machine and ensure the track chain is in alignment with the track frame, as it passes under the rollers
The double flange track rollers support the weight of the track type machine and ensure the track chain is in alignment with the track frame, as it passes under the rollers
The sprocket is attached to the final drive. Its job
is to transfer drive torque to the track. The sprocket teeth engage the track links and propel the equipment on the continuous track loop.
The front idler serves as a guiding support for the track chain. The idler is spring-loaded and mounted on slides, or guides, that allow it to move back and forth inside the track frame, as the machine passes over uneven ground. The spring-loading effect causes the idler to maintain the desired tension regardless of operating conditions.